Replace the fuse in your Salon Vac
Troubleshooting step by step guide for when your Salon Vac does not turn on.
Solution: The fuse needs to be replaced.
A fuse is a protective device that cuts off the current if a circuit overloads or if there is a fault. The Salon Vac comes with two fuses located within the fuse holder.
Once you open the fuse holder, and there is no replacement fuse, you can purchase a new glass cartridge fuse from a good hardware store.
Replacement Fuse: Cartridge Fuses 250V 10A 5x20mm
Specification: F10AL250V, F10A 250V, F10 L250V, F10L250V cartridge GLASS fuse 5X20mm
Step 1. Ensure that the unit is switched off and the power cord is removed.
Using the tip of a flat‑head screwdriver, gently open the fuse holder: this is found in the centre of the switch and power cord plug.
Step 2. Remove the fuse casing from the unit.
Pull out the old fuse and dispose.
Replace with the back up new fuse located in the enclosed casing.
Step 3. Insert the fuse holder back into the slot and push into place .
The Salon Vac is now ready to use.
warning: If the fuse blows again immediately, please contact our support team