Install a Back Up Battery on a Treatment Table

You will need:
A Flat Head Screw Driver, Pliers, Hammer & Cable Ties

Step 1:
Lift the back of the Treatment Table.  This will require a second person to help.

Step 2:
Using a flat head screw driver, take off the back panel to get access to the motor.

Step 3:
Cut the cable ties to release the motor.

Step 4:
Take out the motor and using a flat head screw driver open the cover to access input area

Step 5:
Open your battery and attach the power cord.  Ensure that it is clipped tightly in place.

Step 6:
Plug the battery cord into the free input of the motor

Step 7:
Close motor cover ensuring that it clips into place

Step 8:
Slide battery onto the motor ensuring that it clips into place and both are secure

Step 9:
Place both the battery and motor back into place

Step 10:
Place both the battery and motor back into place under the frame

Step 11:
Secure motor in place with cable ties

Step 12:
Replace cover ensuring it clips into place

Step 13:
Hitting each fixed point with a hammer will ensure its secured tightly