Replacing the Bluetooth Remote Battery
If your remote is unresponsive, not pairing, or has no light indicator, the battery may be flat or incorrectly installed. Follow these steps to replace it correctly.
Battery Type
Use a CR2032 coin cell battery – available at most supermarkets, hardware stores, or online retailers.
Step-by-Step Instructions
1. Check for Indicator Light
If there’s no light when pressing any button, the battery is likely flat or not installed correctly.
2. Open the Battery Compartment
Slide or twist open the battery cover on the back of the remote (model dependent).
3. Replace with a New CR2032 Battery
-
Insert the battery with the correct polarity (+ side up, unless otherwise marked).
-
Only use CR2032 – other types may not work or fit correctly.
4. Close and Lock the Battery Cover
-
Align the cover so the arrow points to the locked symbol (see image).
-
Ensure the cover clicks securely into place.
The remote should now function normally.
If it shows a light, but doesn’t respond, see how to Reset your Bluetooth Remote.