Install a Back Up Battery on a Treatment Table

You will need: A Flat Head Screw Driver, Pliers & Cable Ties

Step 1: Lift treatment table to maximium height

Step 2: Using a flat head scredriver, open control box

Step 3: If present, remove the middle plug

Step 4: Remove the cover of the control box and set aside.

Step 5:  Open your battery and attach the power cord.  Ensure that it is clipped tightly in place.

Step 6: Plug the battery cord into the free input of the motor

Step 7: Close motor cover ensuring that it clips into place

Step 8: Turn battery to be next to the control box

Step 9: Secure the batter in place with cable ties.