How to change the gas strut on your Lara or Naomi Reclining Chair
Step by step guide on how to change the gas strut on your Lara or Naomi Reclining Chair
If you need to replace the gas strut, you can contact support here
TOOLS REQUIRED:
- 17mm Spanner
- Blanket or Sheet (to lay the chair on)
Step 1: Lay the chair on its side to access to gas strut.
Step 2: Using a 17mm Spanner, turn anticlockwise to remove the bolt at the rear of the gas strut as pictured below.
Step 3: Loosen the nut using a 17mm Spanner, unwind the faulty gas strut from the chair by turning the gas strut anticlockwise.
Step 4: Unscrew bracket from the old strut and install on the new gas strut.
Step 5: Screw the new gas strut into chair, turn clockwise to tighten. The new nut should have approximately a 2mm gap at the end of the thread.
Step 6: Reinstall the bolt.