Install a Backup Battery on a Connect Electric Wash Lounge.
Step by step guide on how to install the Backup Battery on your Connect Wash Lounge.
If you wish to purchase a backup battery for your Comfortel Connect Electric Wash Lounge, select your region below:
YOU WILL NEED:
– Connect Series Battery Back Up
– Flat head screwdriver
Step 1: Recline the wash lounge then disconnect from the power. Locate the control box as pictured below.
Step 2: Access the control box from the back of the wash lounge. Push the tab up while pushing the control box away from you to unhook.
Step 3: Using a flat head screwdriver open the cover on the control box to access input area.
Step 4: Open your battery using the same method as above.
Step 5: Insert the straight end of the power cord to the battery. Ensure that the power cord is pushed in fully, the yellow ring should not be visible.
Step 6: Slide battery onto the control box, make certain that it clips into place.
Step 7: Plug the other end of the battery cord into the middle input of the control box.
Step 8: Close cover and slide the connected control box and battery back onto the wash lounge.
