How to replace the backrest lever on your Quattro/Aquarius Treatment Table
Step by step guide on how to replace the backrest lever on your Quattro/Aquarius Treatment Table
If you need to replace the backrest lever, you can contact support here
TOOLS REQUIRED:
8mm Spanner
17mm Spanner (if required)
Phillips Head Screwdriver
Step 1: Locate the bolt and locknut as pictured below.
Step 2: Using a Phillips Head Screwdriver turn anticlockwise to remove the bolt. Place an 8mm Spanner on the locknut to stop it from turning.
Step 3: Gently lift the backrest up to release the lever.
Step 4: Ensure the nut from the gas lift to the lever bracket is firm. Tighten with a 17mm spanner if the nut pictured below is loose.
Step 5: Using a Phillips Head Screwdriver turn the bolt clockwise to install and tighten. Screw the locknut back on once the bolt.