comfortel E-Lift Owners Manual
#4067.01 Comfortel e Lift™
#4-BASEBBEL Comfortel e Lift™ Base
The Comfortel e Lift™ converts compatible Comfortel salon chairs into an electric height adjustable chair.
This guide covers assembly, charging, operation and ongoing care.
Jump to Section
What’s in the Box
Box 1
1. e-Lift™ Column & Control Unit
2. Foot Control
3. Hex Key / Allen Key
4. 4 x Mounting Screws
5. Power Supply & Power Cable
Box 2
6. e-Lift™ Base
Before assembly, check that all components are present and free from damage. If anything is missing or damaged, please contact Comfortel before installation.
Assembly: e Lift™
- Place the e-Lift™ upside down on the packaging carton insert.
- Align the Base with the mounting holes. Ensure the Comfortel logo of the e-Lift™ aligns with the foot control opening in the base as pictured.
- Insert the four mounting screws.
- Tighten all screws using the Hex Key / Allen Key.
- Carefully turn the e Lift™ upright.
Important: Ensure all four mounting screws are fully tightened before use.
Assembly: Chair to Base
- Lower the salon chair top onto the e Lift™.
- Sit on the chair to ensure it is fully in place and secure.
- Clip the foot control securely into the base.
Operation: First Time Use
- Connect the power supply and switch the power on.
- Wait 10 seconds.
- The green light on the power supply will flash twice, indicating the e Lift™ has been activated and paired.
This activation is only required the first time the e Lift™ is powered on.
Important: Fully charge the e Lift™ before first use for optimum battery performance
Charging the Battery
- Connect the supplied charger to the e Lift™.
- Plug the charger into a power outlet.
- Allow approximately 6 hours for a full charge.
Tip: The e Lift™ can be used while connected to the charger.
FAQs & Troubleshooting
Can I use the e Lift™ while charging?
How long will the battery last?
Cleaning & Care
Keep your Comfortel e Lift™ clean by following these simple care instructions.
Cleaning
- Wipe with a soft cloth dampened with warm water.
- Dry with a clean, soft cloth.
- Do not allow excess water to enter the unit.
Do Not Use
- Boiling water
- Alcohol or solvent based cleaners
- Acetone
- Bleach
- Abrasive cleaners or steel wool
- Furniture polish
Important: Always disconnect the charger before cleaning.
Maintenance
- Fully charge the battery before first use.
- Recharge the e Lift™ when the low battery alert sounds.
- Check all mounting screws regularly and tighten if required.
- Inspect the power supply and cables for damage before use.
- Replace the foot control batteries (2 × AAA) when the LED indicator illuminates.
Important: There are no user serviceable parts inside the e Lift™. Contact Comfortel if servicing is required.
Safety Instructions
General Safety
- Read and keep these instructions for future reference.
- Use the e Lift™ only for its intended purpose.
- Do not use attachments not supplied or approved by Comfortel.
- For indoor use only.
- Do not use outdoors or on wet surfaces.